Home

How to Clean Tiles in Bathroom

DBL Ceramics

/ 05 September 2022

Grimy bathroom tiles? Have you tried many ways but couldn’t get a satisfactory result?

Well, the bathroom itself gets dirty fast for frequent use. And with every use, your stunning bathroom transforms into a dingy place for soap scrum, mildew, etc.

As a result, the bathroom ends up on the list of one of the deep cleaning works around the house. So, how do you clean bathroom tiles?

In this article, you can learn how to clean tiles in the bathroom properly.

Time to Make Your Bathroom Look SPARKLING Again: 5 Effective Methods

Cleaning the bathroom is challenging because stains and dirt get strongly stuck. Again, it can be impossible for some of us to locate the right cleaning solutions.

Considering that, we’ve put together two widely used ways by homeowners, including what you use to clean bathroom tiles in these methods.

Method 1: Water and Vinegar

This method is more basic cleaning. It involves using items that are always available in every household. Carry out this cleaning as per the following steps –

Cleaning items

White or cleaning vinegar
Warm water

Cleaning bathroom tiles with vinegar

To use vinegar, you need to mix water and some distilled cleaning vinegar. Don’t have any cleaning vinegar? White vinegar will do the job perfectly too.

Mix an equal amount of water and vinegar ratio so that the mixture has the required amount of cleaning agent. For example, if you take 5 tablespoons of vinegar, you must mix 5 tablespoons of water.

Once the mixture is ready, grab a rag and dab it into the mix. Now, start scrubbing thoroughly. When you are done scrubbing, you need the first wipe to dry the tiles. Finally, leave the bathroom air dry.

Method 2: Lemon Juice and Baking

This is another easy method that you can carry out with common kitchen ingredients like lemon juice and baking soda. Seriously? Yes, lemons are acidic, which makes them an excellent tile-cleaning solution.

Cleaning items

Lemon juice
Baking soda
Spray bottle (Optional)
Sponge or damp cloth

Cleaning bathroom tiles with lemon juice

First, squeeze out some lemon juice in a pot. Next, get a spray bottle and fill it with freshly extracted lemon juice. After that, apply some baking soda paste to the tiles. Then, you spray the juice all over the tiles.

Next, take a damp sponge. With that, wipe the lemon juice from the tiles. You need to clean a little rigorously here.

Don’t have a spray bottle around? Worry not.

Do it this way— after you have lemon juice in a pot, you can directly dunk the sponge.

You can use the sponge to wipe down the tiles. After that, you simply wipe the tiles with warm water. You can use the sponge again but wash off the lemon juice. Or you can use a damp cloth.

Method 3: Cleaning Product

You will find many tiles cleaning products. But remember, tidying your bathroom tiles with a cleaning product depends on which product you are using.

Here is what to use to clean bathroom tiles with cleaning products.

Cleaning items

All-purpose cleaning or powder
Spray bottle
Steam

Washing bathroom times with cleaning products

If you have bought cleaning spays, you can apply a light coating on the tiles. And if it’s powder, mix it with some water and then spray it.

Then you wipe it down with a scrape of clean cloth.

Tip: You can utilize water steam clean faster. For that, fill the tub with hot water, and close the door and window for the bathroom to contain the steam. This strategy will slacken the mess. After, you can apply the cleaning product and wipe the tiles.

Method 4: Hydrogen Peroxide

It’s the best way to clean bathroom tiles if you need to perform some heavy-duty cleaning of your tiles.

Cleaning items

½ cup baking soda
1 tablespoon liquid dish soap
¼ cup hydrogen peroxide
Spray bottle
Sponge or rag

Cleaning bathroom tiles with Hydrogen peroxide

Take ½ cup of baking soda and mix that with – ¼ cup hydrogen peroxide and 1 tablespoon of liquid dish soap. Next, take the mixture into a spray bottle and spray that on the tiles.

Now, you must leave the mixture on the tiles for not more than 10 minutes. When the time is up, you clean up the tiles with a clean and damp rag/sponge.

Method 5: Bleach

This is the last idea from our how-to-clean bath tiles methods repository. And it’s another strong cleaning product. That means you apply this method if you need to clean your bathroom tiles deep.

Cautions

Bleach emits a noxious vapor into the air. That’s why you need to keep the door and bath window open. If not, the room will be clouded and irritate your nose.
Bleach irritated skin. So, you need to put on a good pair of cleaning hand gloves. Also, the strong fume will bother you. For that, you can use a mask.

Cleaning items

1:3 ratio of bleach and water
Spray bottle
Damp cloth
Warm water
Cleaning hand gloves
Mask

Cleaning bathroom tiles with bleach

First, combine bleach and water. Remember, you need to keep a 1:3 bleach and water ratio to get enough tile cleaning properties. Suppose you need 3 tablespoons of bleach. Now, you need 12 tablespoons of water.

Once the mixture is ready, you have to use a spray bottle. So, fill the spray bottle as you would in any other method and spray that on bathroom tiles. Next, wash up the tiles with warm water. To apply to clean them with water, you can use a rag.

Concluding Remarks

It is important to clean bathroom tiles properly to maintain hygiene and safety. But sometimes, it might get difficult due to time constraints and inappropriate methods. To keep your stunning bathroom tiles in good condition, you must clean them regularly.

We have shared the 5 effortless methods of tile cleaning. Now, check the bathroom tiles to identify what dirt is dealing with and choose any of the aforementioned methods for a shiny bathroom.